Description

VandlGuardONE Premium Non-Sacrificial Anti-Graffiti Coating 1 Yr Rainguard VandlGuardONE Non-Sacrificial Anti-Graffiti Coating With 1 Year Labor Warranty Rainguard is North America's #1 anti-graffiti coating mfg and VandlGuardONE™ offers premium graffiti protection system against the permanent damage of building surfaces caused by graffiti tagging. It can be applied to a wide variety of both unpainted and painted surfaces. As a n0n-sacrificial coating, treated surfaces can sustain repeated attacks and subsequent graffiti removal without the need to re-apply after each tagging. Rainguard offers your choice of 1, 5, 10 year premium LABOR and MATERIAL warranty systems using a base of VandlGuard ONE, VandlGuard FIVE or VandlGuard TEN and topcoat of VandlGuard Finish Coat. VandlGuard™ is approved by the City of Los Angeles for use on all city owned buildings, Research Report: RR #25060-T and approved by the Toronto Transit Commission, North America's largest public transportation system, for use on all owned properties. VandlGuardTEN is also specified on all new Walmart retail stores when graffiti protection is required. VandlGuardONE is available in ready-to-use 1 and 5 gallon containers. Where is VandlGuard ONE used? Construction & Remodel Projects: Exterior building|screen|retaining walls, fences, highway sound barriers, school and public facility interior hallways, restrooms, commercial information signs, bridge abutments, playground park areas Homeowner projects: Fences, exterior walls, mailboxes Non-traditional applications: Vinyl printed banners, stickers on public use bicycles, flower planters on public streets Why VandlGuard ONE Anti-Graffiti Coatings? Premium 1 year Labor & Material warrantied protection for treated surfaces to sustain repeated graffiti removals Low Gloss Sheen with minimal change in look your building appearance Clear, Non-yellowing formula Easy to apply – brush, roller, sprayer Single component, no mixing and unlimited recoat window Retards growth of mildew, mold, fungus, bacteria Meets MPI specifications #105 Graffiti Protection Topcoat 100% Eco-friendly: with low voc and low odor Requires initial application of Micro-seal Water Repellent on unpainted surfaces Specified by architects in CSI 07190, 099623, 099625, 099650 TECHNICAL INFORMATION Color Clear, minimal change in appearance or surface texture Sheen/Gloss Level Low gloss Dry To Re-Coat 1 – 2 hours depending on temperature and humidity. Turns clear when dry #Coats Recommended 1 coat. Unpainted porous surfaces require initial application of Rainguard Micro-seal Water Repellent Permeability 100% vapor permeable Application method Low pressure hand pump or airless sprayer, roller, brush Where Can it be Used Interior|Exterior unpainted and painted surfaces (not designed for foot or vehicular traffic) Apply to New Concrete 10 days Low Application Temperature 40F|4.4C Surface & Air Base Water VOC Content <20 g/L Use on Material Concrete, brick, masonry, stucco, block. natural stone, EIFS, wood, metal, vinyl and some plastic surfaces Warranty Available 1 year labor & material warranty based on a 1 coat application of VandlGuardONE – download warranty application to register, see DOCUMENTS tab above Full Chemical Cure 7 days for full product performance CERTIFICATION/TEST Leed 4.2 (1) point credit available Meets LEED and SQAMD low VOC requirements MPI #105 Graffiti Protection Top Coat Master Painters Institute COVERAGE RATE SQUARE FEET/GALLON PER COAT Porous Surfaces Precision Block 225 Split Face Block 225 Ground Face Block 225 Scored/fluted Block 200 Sand Blasted Block 200 Slump/Adobe Block 225 Heavy Textured Stucco 250 Brick 250 Unpainted Wood 275 Porous Tile 250 Dense Surfaces Fine/Medium Textured Stucco 250 Pre-Cast/Tilt-up Concrete 275 Cast Concrete 275 Sand Blasted Concrete 275 Exposed Aggregate 275 EIFS 250 Metal 300 Painted Surfaces 300 APPLICATION INSTRUCTIONS CONDITIONS PRIOR TO APPLICATION Temperature (surface|air) 40F to 90F (1.7C to 35C) and at least 5F above dew point Moisture of substrate Less than 15% Humidity Less than 80% Rain No rain 48 hrs prior to, 48 hrs after application Cure time for newly poured concrete 10 days Application method Use low pressure hand pump or garden sprayer, roller, brush FOLLOW THESE SIMPLE APPLICATION STEPS The most efficient and easiest application method is using a hand pump or airless sprayer. For smaller projects or ones where overspray is not allowed, use a roller. For the smallest projects such as protecting a sign, a brush is an option. Do a rough measurement of how far each gallon or 5 gallon pail should go per coat and then make sure you are applying at that coverage rate. Using spray equipment, apply VANDLGUARD ONE at recommended coverage rates. Apply in a fine mist, cross- hatched pattern to build up the wet coating. As soon as the entire surface has been coated, immediately repeat process with a second pass. Depending on the porosity of the surface, a light second step may be necessary to complete that coat. If there is a rundown of product, then doing a dry backroll will smooth out the rundown and avoid the possibility of white streaks showing up after drying. The next coat can be applied when the product becomes completely clear, usually in 1 – 2 hours depending on temperature and humidity. Clean equipment with soap and water when finished. GRAFFITI REMOVAL: In many instances, non-abrasive household cleaners safely and effectively remove tagging. However, in the event tagging can’t be removed with these cleaners, then use Rainguard's VANDLCLEAN SUPER GRAFFITI REMOVER for best results. Follow manufacturer’s recommendations and instructions for use. In addition, warm water power-washing has also been known to assist in the removal of tagging. Please refer to the manufacturer for additional assistance. PRECAUTIONS & LIMITATIONS 1. All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. 2. All cracks should be pointed or caulked. All voids, bee holes, masonry surface defects and openings such as conduits, pipes, drains, door frames, vents, air conditioner openings, electrical openings, control joints, or any dissimilar materials should be repaired using urethane or other approved patching. Painted Surfaces Allow newly-painted and stucco surfaces to fully chemically cure before application of VANDLGUARDTEN. Recent formulations of pig-mented paints, coatings, and integrally-colored stucco colorant additives contain biocides. These biocides must be released be-fore application of VANDLGUARDTEN. Please consult the manufactur-er of the paint/stucco coating to determine the chemical curing period. Rainguard is not responsible for yellowing or color differ-ences as a result of application of the VANDLGUARDTEN over un-cured paint or integrally-colored stucco surfaces. STORAGE Store materials in a well-protected area between 45° and 90°F. Avoid freezing temperatures, direct sunlight, and moisture. Keep away from heat sources. Size Price 1 Gallon $ 90.85 5 Gallons $ 392.15 Shipping Shipping cost: No cost shipping lower 48 US States FedEx Ground Delivery time: Typically 3-5 days to process order plus 1 to 5 days transit time after shipment depending on location Payment We accept the following payment methods: PayPal payment due at time of order placement Please contact us if you have any questions. Service PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS