Description

Dekalin DEKAsyl MS 5 sylil modified polymer power glue 290 mL (white) NEW This product data sheet is originally written in English. DEKAsyl MS-5 is a high-quality power adhesive with a high initial strength which can be used in the entire vehicle construction. The areas of use and application are diverse and can be extended as required . Colour: White Content: 290 ml Packaging: Cartridge Fields of application: Bonding of, among others: - Metal frames - corner profiles - Structural bonding of polyester parts - climate boxes - solar installations - SAT systems - Frame and wheel covers - and much more Proper application: DEKAsyl MS-5 can be easily applied with a hand or air pressure gun. For sealing, Dekasyl MS-5 should be applied within 12 minutes (at 20°C/50 % rel. humidity) with a previously dipped in a mild soap solution, or smoothened with a spatula or putty knife. Avoid penetration of the side solution between the joint sides and the sealant, as this will lead to a loss of adhesion. this will lead to a loss of adhesion. For bonding, the substrates must be bonded within 15 minutes (at 20°C/50% rel. humidity) after application of Dekasyl MS-5. The higher the temperature the shorter the working time! In general, an adhesive layer of 2 mm is recommended if similar materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-5 can already be can be overpainted with most industrial paints after only 10 minutes. The best possible adhesion of paint coats is achieved if the paint is applied 4 hours after application of Dekasyl MS-5. Clean tools or remove uncured residues of Dekasyl MS-5 with a clean, colourless cloth soaked in acetone or MEK (it is recommended to check beforehand if the Surface is affected by this cleaner). Technical data: Base material: MS polymer Curing/sealing: moisture Specific density: approx. 1.4 kg/litre Skin forming time (20°C/50% rel. LF): approx. 12 minutes Open time (20°C/50% rel. LF): less than 15 minutes Curing time after 24 h (20°C/50% rel. LF): approx. 4 mm Shore A hardness (din 53505): approx. 55 Volume change (din 52451): less than 3%. Adhesion (Physical Rheometer MC100): approx.700 Pa (measure for the max. not cured adhesive quantity which can be applied per m² without running down) Tensile stress (100%) (din 53504/ISO 37): approx. 1.7 MPa Tensile stress at break (din 53504/ISO 37): approx. 2.8 MPa Elongation at break (din 53504/ISO 27): approx. 210 Shear stress (din 53283/ASTM D1002): approx. 2.5 MPa Tear strength (din 53515/ISO 34): approx. 14 N/mm Solvent content:0% Isocyanate content:0% Temperature resistance : -40°C to +120°C Application temperature : +5°C to +35°C UV and weather resistance: excellent DEKAsyl MS-5 is a high-quality power adhesive with a high initial strength which can be used in the entire vehicle construction. DEKAsyl MS-5 can be easily applied with a hand or air pressure gun. For sealing, Dekasyl MS-5 should be applied within 12 minutes (at 20°C/50 % rel. humidity) with a Avoid penetration of the side solution between the joint sides and the sealant, as this will lead to a loss of adhesion. materials (with similar strength) are to be bonded. The greater the difference in thermal expansion, the thicker the adhesive layer should be. At a temperature of 20°C and a relative humidity of 50%, Dekasyl MS-5 can already be paint coats is achieved if the paint is applied 4 hours after application of Dekasyl MS-5. Clean tools or remove uncured residues of Dekasyl MS-5 with a cle MPN Does Not Apply Brand DEKALIN